Replacement of the in cabin air filter in your vehicle provides long term improved performance and enhanced comfort. All utilize non-woven, pleated, permeable, non-molded pleated non-filtered fabrics to filter airborne dust, pollen, and other soot entering through your vehicle’s exhaust air vents or cooling system. In addition, they provide a good air filtering for preventing unwanted smells in your vehicle. Most automotive cabin air cleaners are equipped with clear, easy-to-read, step-by-step installation instructions for easy installation. However, do not forget to follow the manufacturer’s instructions for the best possible performance.

Before starting your new filter, remove all debris that might be clogging the air flow ducts inside your vehicle. In many cases, these debris are made of small pieces of hair, dander, tree sap, etc. These materials obstruct the flow of air inside the filter. They might not seem a significant problem at first. But over time, they will build up and block the air flow.

If you don’t take care of your in cabin air filters, you risk inhaling large particles of dirt and dust every time you drive your car. Some researchers now believe that this may increase your risks of getting cancer. So, the ideal way to keep your vehicle’s air clean is by keeping your air filter media clean. By maintaining it in good shape, the in cabin air filters help to prevent health problems such as asthma attacks, hay fever, and other respiratory ailments. Some studies have shown that even small amounts of particulates can significantly increase the chances of developing some form of cancer.

Not only are most in cabin filters made to capture airborne pollutants, some manufacturers make them also trap odors. Oils from your car that have not been distilled can contain chemicals and pollutants that are released into the air. Certain types of plastics and metal oxides emit gases that are not very volatile. These odors are trapped by the filters and transferred to a holding tank where the odors can be extracted.

The only way to know which of the cabin air filters is the best to use is to read the user manual carefully. In the user manual, there will be a section devoted to what to look for when selecting a new filter. Make sure that the filter you’re buying is compatible with the engine type of your vehicle.

Most air filter manufacturers provide information about their air filter products on their websites. The manufacturer describes the composition of their air filter media. Make sure that the brand you are considering contains a particular chemical that is effective against the pollutants and contaminants in your vehicle’s air system. Most of the brands available in the market have been shown to be effective against dust and a host of other contaminants. However, it is recommended reading customer reviews first before purchasing a particular brand.

A number of companies produce air filters that are made of synthetic fibers. These fibers are ideal against dust and pollen because they do not trap particles that are smaller than the size of a molecule of air. However, these air filter replacement units are not good at trapping particles that are larger than a molecule. It is for this reason that it is advisable to buy filters that use dual media. Such filters are more effective in trapping dust particles and pollutants than single-media filters are. Such dual media filters also give the best protection against dust and pollen.

It is also important to check out the cost of replacement filters. There are numerous manufacturers who offer various types of cabin air filter replacement units. It is important to compare and evaluate the cost of replacement filters before buying one for your vehicle. The user manual should also provide details regarding replacement options and the cost of installation.

Delaying regularly scheduled vehicle maintenance saves you money; however, most people do it. In high excitement to get on the open road, many people do not take the time necessary to ensure their vehicle is ready for the open road. The following often occurs: your coolant level needs changing, your oil needs replacing, or you have an oil leak. By doing so in this manner, you put yourself and your vehicle at risk for costly, in-depth repairs, and possible damage to your vehicle.

Make Your Own Check List When beginning vehicle maintenance, make a list of all the things that need attention. This list should include such items as your brake fluid, transmission fluid, tires, engine, and transmission fluid, spark plug and carburetor fluid, brake pads and discs, and your windshield. Tires should be inspected twice each year, and your engine and transmission fluid should be checked and changed, every 6k miles, according to the manufacturer’s recommendations. If you have an automatic transmission, you will need to replace your brake fluid every month, according to your manufacturer’s recommendations.

Almost Everyone Makes Mistakes While everyone knows it, very few people make certain that they are actually doing the proper things when it comes to vehicle maintenance. One of the most common mistakes that people make when it comes to vehicle maintenance is not checking the fluids in their car prior to going out on a long trip. If you are using expensive, synthetic lubricants or fluids when driving, you could put yourself at risk for an engine failure. This mistake is almost always made by young inexperienced drivers and often leads to costly repair bills.

Do Your Research Believe it or not, the type of tire you choose can play a role in saving you money on vehicle maintenance. Some vehicles, such as trucks, must be driven with a flat, dry tire to prevent the tires from bouncing across the road during a sudden stop. Other vehicles, such as cars, must be driven with a wet one to prevent the tires from absorbing moisture that causes them to bounce. Wet tires will wear quicker and are harder to stop if they do start bouncing. To save on tire replacement, make sure that you do your research so that you get the right type of tire for your needs.

Tip-Top Shape Tips Another key element to making sure your vehicle performs well is to do regular tune-ups. tune-ups don’t cost very much money, and they don’t take that long, but they do keep your vehicle performing at its best. If you neglect to change the oil in your vehicle every couple of thousand miles, chances are your car will be in trouble before it’s time. If you have an automatic transmission, you need to change the transmission fluid every 1 million miles, or about twice a year. This is another way to save money and get your vehicle in the best possible shape.

Inspect Your brakes, including the brake pads and rotors, regularly. If you don’t inspect these components, you could end up having to pay for brake repair or even replacement. You will also want to check the hoses, lines, brakes,  fuel injection, and everything else under the hood regularly to ensure that your vehicle is running correctly and thoroughly. These tips for the summer season are specially for the fast summertime, when you need to get your car in shape, but don’t want to spend a lot of time or money doing so.

The main culprits for damage to your vehicle, aside from high speeds and road debris, include extreme temperature shifts, salt water exposure, and mechanical damage. There are a number of different ways to protect your vehicle from these potential hazards, depending upon where you live. Extreme temperatures and weather conditions can present a challenge to your vehicle’s cooling system, and if you live in a region that experiences extreme heat regularly, you should consider investing in a vehicle cooler for the summer. While keeping your engine cool will keep the engine from suffering damage, it will also prevent the metal parts of your radiator hoses from cracking, and it will prevent metal shavings from accumulating on your engine’s parts. Vehicle coolers are a great way to avoid potentially harmful wear-and-tear issues that could potentially damage your vehicle.

Your brake pads and rotors are especially vulnerable to heat during the summer months. Although it might seem tempting to purchase a cheaper, less reliable braking system, it is better to buy quality rotors and brake pads than to risk buying a cheaper, less effective braking system. In order to save money on your vehicle’s cooling system, you should make sure that your vehicle’s windshield is properly maintained. When your windshield becomes cracked or chipped, you run the risk of having rock chips deposit on your windshield, which could lead to breakage, loss of consciousness, and even death if the chipping occurs while you are driving at high speeds. You can avoid all of these potential accidents by keeping your vehicle’s windscreen clean at all times.

How often should tires be rotated? Generally, during normal use, it’s a good idea to have all your tires rotated and then balanced whenever a new tire is patched or replaced. But in extreme environments, like off road riding and off road conditions, the circumstances change and it may be wise to have them rotated more frequently. Here are some reasons why.

First, having your tires evenly inflated can save you a lot of money. A lot of vehicles lose their inflation pressure while they’re parked because the air pressure in the tires has diminished to low levels. The tires won’t rotate properly if they are not even, so the tires won’t grip the road. This can lead to skidding, wandering off the road and a lot of accidents due to people losing control.

Second, having your tires properly aligned can save you money and a lot of frustration. If the alignment is not correct, then the tire valves may not line up with each other. This can cause tire blowouts. Having the correct valve caps on the tires will help prevent blowouts as well as help you determine if they are even or not. When you go to change the tire valve caps, it is important that you know the correct procedure for replacing them.

Third, having proper valve caps will prevent your tires from wearing out too quickly when they have a problem. If the air pressure decreases too much, it can cause the tire to wear faster than normal or to split. If the tire is worn too quickly, the driver might be able to tell by looking at the mileage and the temperature. It is important to inspect the air pressure valve on a regular basis for problems and wear.

Fourth, having low pressure in your tires can create problems with the steering, suspension, and even your windshield. This can make you have accidents because the steering is not very responsive. If the tires are under low pressure, you will also notice that they do not grip the road as well. The steering will be stiff and you will have poor balance. If you have any of these symptoms, you should visit your mechanic.

Next, you should examine the remaining tread depth on your tires. A car needs the tires to be at the proper tread depth to balance the weight of the vehicle. Too deep of a tread depth creates uneven wear and a loss of traction. Too shallow of a tread depth creates a loose tire that will slip. The vehicle will respond poorly to turns. This is a common problem for vehicles that are overweight.

Lastly, a vehicle’s fuel economy will depend on the correct tire size. An auto store assistant will be able to help you measure the tire size that your vehicle should have. Some vehicle manufacturers require that tires have specific tire sizes. If you find that your vehicle came with a different tire size than the manufacturer recommends, you should talk to someone at the auto store. They should be able to help you find the appropriate tire size for your vehicle.

Finally, your wheels and tires should be in good working order. If you find that your tires or wheels need repair, you should take care of the problem right away. If you put off the repairs, you may end up damaging your vehicle further. It is important to maintain your tires and wheels so that you can get the most out of your vehicle. Find an auto service center in your area to get your tires and wheels inspected on a regular basis.

The benefits of an occasional oil change for your car are many. You might not even realize the things that you can do to improve your car’s performance and how it feels while it is being maintained. Even if you are a daily driver you can enjoy the benefits of an oil change. Find out what some of these are so that you can also reap the rewards of having it done.

One benefit of having an oil change is that you will notice that there is less smoke coming from your car. This means that you might be driving around a lot longer than usual. With the pollution levels on the rise in the world today you have every right to enjoy the benefits of an occasional oil change. When you have a professional service to take care of it you will notice that there is a significant decrease in the amount of smoke that comes off of your car. There is no reason for you to have to worry about what might be causing the pollution that is around you all day every day.

Another great benefit of an occasional oil change is that you will notice that the engine operates more smoothly when you have one. It will feel more solid in the wheel rotation and you will be able to accelerate a bit faster depending on the conditions. This means that you might be able to get to your destination a little sooner each day.

A third benefit is that it will protect you against major engine problems. Sometimes the oils that are used for your vehicles will wear down. If you don’t change them out when they are getting too old, you might find that you are experiencing major problems with your car. This might include that it won’t start, or it might start and then go out completely. Getting an oil change will allow you to protect yourself from these problems before they become serious enough to cost you everything that you have.

A fourth benefit is that you can significantly improve the look of your car. When you do an oil change, you will find that your car will look cleaner and is more durable. It will also feel softer on the road as well. There are a lot of benefits that come along with performing an oil change so it is definitely worth the money.

Finally, you should always check the fluid in your oil change kit. You should always remember to do this so that you don’t have any issues when it comes time to change it out. This is also used to make sure that your engine is free of any contaminants that could cause serious problems. Find out when the most frequent time that you should change out your oil change kit will be. In general it should be done every three thousand miles or so.

Always remember that having your own oil change mechanic is even better than going to someone else. Make sure that you take the time to learn how to perform the maintenance to your vehicle properly. You don’t want to end up spending a lot of money because you didn’t take the time to learn how to perform your own oil changes. The same can be said for taking your car to someone else for tune ups. If you don’t know how to perform the maintenance on your own than you will end up wasting money and damaging your engine.

It may also help to have a friend or family member help you change your oil. This is especially helpful if you have a difficult time doing it yourself. Also, it helps if you have someone who can watch your car while you are changing it out. Find out whether you can have them help you perform an oil change when you have someone who can assist you as well. There are plenty of benefits to learning how to perform your own oil changes so you should seriously consider making this a part of your regular maintenance routine for your car.

What is the optimum number of times, the tires should be rotated? How often tires are rotated is a hotly debated topic among tireors everywhere. The truth about tire rotations is that there is no single number of times the tires should be rotated. What you need to understand is that there are multiple factors that will affect how often the tires are rotated. Tire rotations are dependent on many different things, so the following list should be used as a rough guide.

– Tire wear – The amount of tread worn on a tire indicates how often that tire should be rotated. Rotating a tire too often can cause it to wear out faster and hence have less tread remaining. Likewise, tires with fewer treads are more likely to wear out faster and hence need to be rotated more often. Even tire tread can impact the actual life span of tires and the impact varies on a case by case basis.

– Tying costs – If you buy tires that wear out more quickly, your costs will rise because you will need to replace them more often. On the other hand, buying new tires that wear out slowly will save you money because you won’t need to replace them as often. In some cases, the cost of new tires can actually outweigh the cost of rotating your tires. – Longevity – How long a tire lasts affects how often it should be rotated. Rotating a tire too often will wear them out faster, which can make them last for less than a year.

– How many times a year? – Not all tires need to be rotated the same number of times a year. Some tires can be rotated more than once a year, while others only need to be rotated every 3 months or so. Before deciding how often to rotate your tires, you should determine how long each individual tire in your fleet is intended to last.

– Allergies – One important thing to keep in mind when it comes to tire rotations is that allergies can have an impact on tire longevity. Some people are sensitive to chemicals used in tire rotations. Others may have problems with chemicals used to bond the tread. It is important to know how often you should rotate your tires based on how often you are likely to use your vehicle. For instance, someone who drives a smaller vehicle may last longer if they have tires rotated more frequently.

– How much to use? – Tire rotations are not an effective way to extend the life of your tires if you rarely use your vehicle. If you frequently use your vehicle, then you should rotate your tires at least every 3 months. You should also consider the terrain of where you drive as well as the driving habits of other drivers. Driving conditions can have an impact on proper tire rotations as well as the quality of service and longevity you receive.

– Tires should be rotated based on the manufacturers recommended tire rotation pattern. This means tires should be rotated so that the wear area is not concentrated in a small area. The recommended tire rotation pattern is called the fourth and fifth wheel designs. When you are looking at a tire rotation chart, it is important to pay close attention to the direction of the rotation pattern.

– Front end load – Rotating tires on the back end will increase passenger safety and cargo space. When you have two cars parked facing each other, it can be difficult for a person to open a trunk on one car without risking someone getting out of the other car. When you rotate your tires to the back of the car, this increases passenger and cargo space by reducing the need to prop up the back of the vehicle. When you have tires that are rotating on the front end of your car, the weight of the car will put more pressure on the back tires.

A Car Battery, sometimes called a recharging system, is an electricity storage device that uses a chemical reaction inside the battery to generate electric power. The stored electrical power is then used to start your car’s engine, transmission, and other engine controls. If the internal chemical reactions in a car battery are interrupted for any reason, the power generated will be less than the battery’s potential ability to supply current. The result can be less than usable power, or the entire battery may need to be replaced.

How to replace car batteries starts with understanding how they work. As car manufacturers have become more knowledgeable about how their batteries work, they have come up with more efficient methods of producing car batteries. New high-performance batteries are used almost exclusively by manufacturers today. While these batteries do not use the small amount of energy needed to power a typical electric vehicle when it is new, they will recharge very quickly. After a few thousand charge-offs, most batteries will be able to hold their charge and serve you for many more charging cycles.

Unfortunately, for every car battery replacement service component that you purchase, there are several other pieces of information that you also must know. This will help you choose the best car battery replacement service for your needs. First, know how many cells you will need to replace. This will be dictated by the manufacturer, as well as the model of your particular car battery. Most auto parts stores should be able to recommend a number based on the age of the car batteries.

Next, you need to consider how much each individual cell in the auto repair part costs. Auto parts stores should be able to provide you with a cost-per-cell calculator so you can figure this out easily. In addition to the cost per cell, you should also figure in how much it will cost to mount the car battery replacement service system. Knowing how much the system will cost in total can help you make an informed decision about which component will be cost-effective.

Once you have determined how much it will cost to replace the existing battery and install the new battery, you can then determine how long it will take to charge the batteries completely. Most auto repair shops can install a fast-charging system, which will get your car up and running within a matter of hours. A charger, on the other hand, will allow you to plug the car in for at least two full days in order to keep the battery fully charged.

For optimum performance, you will definitely want to invest in an aftermarket vehicle charging system. These systems will allow you to crank up the cranking amps of your car battery replacement in a relatively short amount of time. While this might seem like a money-saving decision, it is important to note that these higher cranking amps will require more power from your vehicle’s electric motor.

Finally, you should take a look at the size of your battery pack. The size of your batteries is determined by the amount of load that they are required to handle when driving your car. Certain cars, such as high-performance automobiles, will need larger batteries. In general, the bigger the battery pack on an automobile, the more powerful the vehicle will typically be. If you want to avoid draining your vehicle’s batteries, you should make sure that your car battery replacement batteries are adequately sized for your specific purposes.

Finally, you should remember to factor in the cost of your new battery into your overall automotive cost. As previously mentioned, charging your battery will be very costly, especially if you purchase a high-performance battery. In order to save money on the initial purchase, you should consider purchasing a battery with a low initial purchase price and a high rate of return. In other words, make sure that you buy your batteries in a bulk quantity so that you can sell them for a profit on the secondary market once your battery has reached its useful life. Keep in mind that your battery’s usefulness will decrease over time, so it may be a good idea to purchase your battery early.

Transmission fluid is a vital part of any automobile, aiding to cool and lubricate all the moving parts in your transmission. Without it, those parts would begin to suffer from excessive overheating, which in turn would lead to a complete transmission failure and an expensive repair bill. What most drivers don’t realize is that transmission fluid is one of the most expensive types of fluids you will regularly need to purchase for your vehicle. Its price can be much higher than the other types of fluids available. This is because it is used on a daily basis.

You will have to make many determinations in order to determine how often you should check your fluid. Your engine requires fluid changes at least once a month, depending on the age and mileage of your vehicle. In addition, your transmission must be maintained by the owner, as it is always best to ensure its optimal performance by keeping it in good shape. To help determine how often you should change your fluid, you should first calculate the required amount. This number will include all necessary elements such as the manufacturer recommended interval and the recommended mileage for each individual model.

You should always remember to flush the tank before putting your vehicle into any sort of maintenance procedure. This is because it must be completely dry in order to allow proper flushing of your transmission fluid. It is also important to ensure that you have replaced all necessary parts before starting your engine. This ensures that all components are properly lubricated and free from dirt or debris that could cause a failure during your flush.

The most common reason for requiring a transmission fluid change is a loose or damaged spring. Other reasons for needing a transmission fluid change include general wear and tear on the transmission fluid, as well as serious problems with the timing system. When it comes to checking your vehicle’s engine pressure, you should remove your key and turn the engine over. If you feel a small pressure increase, this means that you require a transmission fluid change.

The average cost of a transmission fluid flush is roughly forty dollars per gallon. Needless to say, there is significant cost saving if you can prevent a complete replacement. This is where an online search could prove to be advantageous. It is important to understand, however, that not all stores are offering free fluid deliveries, so you may need to invest in a few extra bucks to ensure that you get your hands on top-quality fluid at a reasonable price.

You should consider hiring a professional company to perform your transmission fluid change. These companies are able to make sure your transmission fluid is changed at the right time. They use high-tech equipment to monitor the level and replace your old fluid with the new one. With their help, you are also given peace of mind knowing that your car will run smoothly once again.

There are three main types of replacement fluid available for your purchase. Three kinds are available, namely, full synthetic, and conventional. Full synthetic is the most expensive option and is mostly used when you have a high mileage car. It is more cost-effective than conventional as it does not demand frequent replacement. The conventional fluid is used when you regularly maintain your car and it is cheaper than synthetic fluid.

There is a third type called thermolysis and it is used when you are not performing any maintenance procedure and you want to save money. Thermolysis flush is available at a very low cost as it is a maintenance procedure that is seldom performed. Once your car has been diagnosed to require a new fluid, you can shop around for a cheap fluid. Make sure to contact a reputable auto mechanic in case you have any other queries.

Brakes are one of the most important parts of a car. Their function is to slow down or stop a car’s movement so that it remains in line with the road. A brake is also known as a power-assisted braking system because it employs the power of pressure from an external source to induce a counterforce against the wheels to reduce their speed or stop them entirely. They work on a mechanism called a brake pedal. There are many different types of brakes and some of the more popular ones include drum brakes, hydraulic brakes, and disc brakes.

Description: A brake is an active mechanical device that resists motion by capturing kinetic energy from a dynamic system. It’s most commonly used for stopping or slow motion of a heavy moving object, usually a wheel, axle, or another moving component. Depending on the material and design, they are usually made of plastic, metal, or ceramic material. They employ pressure to work against the force of gravity by compressing or expanding a material. This results in a reduction of the brake fluid flow, thus decreasing the fluid consumption and decreasing the cost of brake repair or service.

How They Work: There are four main types of brakes: drum brakes, disc brakes, rotors with calipers and drums, and rotors without calipers or drums. The type you choose depends on your driving conditions and the vehicle. Brake pads and disks, as well as brake fluids, are replaced differently. For example, brake fluid is drained before use and refilled while you drive.

How They Work: A disc brake operates in much the same way as a standard disc brake on a car. The main difference occurs when there are two piston-type components under each piston. The brake pad moves up and down on the disc brakes cylinder piston and the caliper cylinder piston moves up and down on the caliper piston. Because both types use pistons, the operation is more similar to that of standard discs. The main difference occurs in how the piston moves between the two. This can affect braking performance.

What They Do: Aside from the main function of stopping, disc brake pads also contribute to the efficiency of a vehicle’s braking system. Brake pads reduce friction material that comes off the wheels during a stop. This reduces heat buildup which helps reduce the tire’s weight. When the friction material is less, the brake pads wear faster. This causes fewer brake repair visits because the brakes are less likely to need to be serviced.

How They Work: In addition to helping to decrease wear and improve braking efficiency, disc brakes are also found on many new vehicles. They are often offered as standard equipment whenever you purchase a new car. While you may not notice them at first, over time you will notice how much less gas your vehicle consumes when driven with disc brakes. The reason for this is because brakes can keep the vehicle from jumping out of control if the driver does not apply enough pressure.

There are four sizes of disc brakes. There are the 3-inch disc brake pads, which are the most commonly sold. Then, there are the 2-inch drum brake pads, which are slightly less effective than the 3-inch pads. Finally, there are the 1-inch disc brake pads, which are the least common but have the most incredible friction material.

The Big Picture: Despite the name, caliper brakes do not actually stop the car. Instead, they transfer braking force to the rotor and caliper, allowing the wheels to slowly stop without the driver applying full pressure on the brake pedal. The rotor and caliper work in conjunction with the piston to provide the needed braking power.

Whether you decide to perform an oil change yourself or go with a mechanic, the average service usually costs between twenty and seventy. Keeping up to speed on regular oil changes can extend the lifetime of your vehicle’s engine and help it function more efficiently. Oil changes, when performed by a licensed mechanic, should be performed every three thousand miles or every three months. With proper oil change, the engine can function better and last longer. If your engine oil has been changed too often, it will be unable to properly function. With the correct oil, you can extend your vehicle’s life.

“It is not necessary to have a complete interval at once. The intervals should be spaced out so that the motor oil levels are not depleted. In addition, changing the motor oil too frequently may lead to irregular wear that will need to be attended to periodically.” He goes on to say, “But if the intervals are too short, then it is suggested to get the motor oil changed right away, to prevent engine failure.”

The manual for changing conventional motor oil lists the recommended interval in accordance with manufacturers specifications as three thousand miles. This information comes from the US Environmental Protection Agency and is based on the conclusion that synthetic oils are fifteen times less likely to contribute to motor oil spills than conventional oil. The three thousand mile rule can also apply to biodiesel used in conjunction with conventional oil. So, it seems to be at least theoretically possible to comply with the three thousand mile interval provided, although compliance is voluntary.

When doing a cost analysis of motor oil one must take into account the cost of synthetic oil as well. If synthetic oil is required, the cost could add up to more than three hundred dollars per gallon. However, as noted earlier, the savings may be realized after the first year of use. The cost of a typical synthetic oil refill at the filling station could range from two to four dollars, with a saving of up to ninety-five percent, or more when compared to conventional motor oil. When comparing conventional and synthetic motor oil. “It’s not that one is cheaper than the other; it’s just that the first year of use delivers the most benefits.”

Regular oil changes cost about twenty-five dollars to One Hundred Dollars to perform. This can include both fuel and time for driving to and from the oil-change location. The economic benefit to doing it periodically versus not performing any changes at all. Of course, this calculation considers only when a change is necessary. It does not consider the incremental costs caused by not performing maintenance or driving to and from oil changes locations that are too far away or inconvenient.

A major benefit to synthetic oils is that they provide engine protection that conventional motor oils do not provide. Synthetic oils have been shown to increase the life and durability of engine parts. They also improve performance and reduce the risk of bearing damage caused by extreme heat. In addition, synthetic oils are flame retardant, have been shown to reduce emissions and improve fuel economy.

In addition, regular oil changes do not affect the performance of vehicles’ engines. When full synthetic oil is added during a service, it increases the performance of the engine. Regular maintenance of the vehicle increased mileage by seven percent and improved performance on the freeway by nearly one percent. This advantage is nearly double the advantage derived from conventional motor oil.

In recent years, several automobile manufacturers, such as Honda and Toyota, have designed and developed oil life monitoring systems that incorporate synthetic oil. Many of these systems are currently being installed in new vehicles. The systems work by collecting data during every service stop and by using computer software to calculate the amount of oil used and to monitor engine temperatures. Automakers are continually designing new features and refining technology to meet consumer needs. Automobile industry groups, such as The Automotive Industry Association, believe that more consumers will demand oil change services, as they become aware of the additional benefits offered through the use of an oil change interval chart.